I am sure some of you miss the good old days of manual cars that used carburetors inside the engine. While it might have been easier to figure out, the carburetor type of engines was not friendly to mother earth.
To comply with the emissions law, auto manufacturers came up with the fuel injection system. This modern technology has been present in our automobiles since the 1990s.
While it proved effective at reducing pollution from cars, the system is expensive and complicated. With the aging of your vehicle, carbon becomes a residue in both the engine and the injectors that power the fuel.
Unless you find a way to remove the carbon build-up, you’ll find yourself spending more money on gas as your miles per gallon stats continue to worsen.
The invention of the fuel injection system gave us the ability to accelerate faster, while also helping the environment by creating much less pollution, as compared to the old carburetor engines.
What causes Dirty fuel injectors?
The primary culprit can be traced to the type of gas you’re using. Some of those cheap gas stations you frequent have bad fuel that will have a negative impact on your car’s performance in due time.
If you’re in the habit of thinking all gas is created the same, you’re sadly mistaken. Low-quality gasoline is manufactured with less detergent or less effective fuel additives.
The clogged fuel injectors in your automobile are powerful enough to compromise the atomized spray pattern required for an excellent burn rate once the spark plugs are ignited.
The way you drive can also be a contributing factor. If you tend to accelerate fast, most likely you’re sending more fuel through the fuel injectors than it’s required, which helps to increase the carbon residue.
Does fuel injector cleaner work?
The right answer is yes! Thousands of motorist use them on a daily basis, but we will see from the Fuel Injector Cleaner Reviews about the different brands, and how to select the best one for your automobile.
A good car fuel cleaning can be as easy as deploying the power of a cleaning kit, which can run through your fuel injector fuel system.
The older your car gets, the more carbon that’s built up and that is why it is recommended you clean out your engine fuel system every 25,000 to 30,000 miles.
If you fail to heed this warning, you’ll just be spending more money on gas as your engine slowly deteriorates. Gas guzzlers are usually created from neglect to clean the fuel injection system on a regular basis.
You should know that if your fuel injectors are clogged and dirty, you’ll experience more unwanted emissions as your car misfires and develops engine problems.
A best fuel injection cleaner is able to clean out the carbon build-up and remove all the dirtiness from your fuel injectors, so that you can experience peak performance every time your drive.
Not only would your output of emissions be lessened, but your car’s consumption of gasoline would be substantially reduced.
What is the best fuel system cleaner?
One can find an endless supply of fuel injector cleaners available for purchase online, all claiming to be the best at unclogging dirt and carbon from the nozzle of your injector.
Rather than just relying on the sleek press releases by the different manufacturers, this fuel system cleaner review will bring you some of the best ones based on performance, users’ ratings, and sales Figures.
So, rather than spending a great deal of money on complete engine overhaul or tune-ups, use one of the best injector cleaners listed below to get your gasoline or diesel engine back to top-notch performance.
Fuel Injector Cleaner Reviews
1 – Liqui Moly 2007 Jectron Gasoline Fuel Injection Cleaner
This product is not what you’ll call a full kit, but it’s a carefully created concentrated fuel injection cleaner.
The Liqui Moly 2007 Jectron Gasoline Fuel Injection Cleaner is packaged in a 300 ml can which is about 10 ounces.
This powerful product is capable of cleaning out dirt from gasoline injection systems, while also removing all the carbon deposits that sit in your car’s fuel distributors, fuel pipes, and inlet and injection valves.
After the cleaning procedure, you’ll have no more slow starting problems or lean surging. Your idling will become smoother while also increasing your throttle response time.
You can consider the benefits of low pollution as your contribution to saving mother earth from destruction.
With clean fuel injectors, your engine will simply regain its lost glory of optimum performance. Another great benefit is the money you’ll save from using less gas.
This fuel injection cleaner is also suitable for engines with catalytic converters.
Good video of how to use the Fuel Injection Cleaner
2 – Royal Purple 11723-6PK Max-Clean Fuel System Cleaner and Stabilizer
Not many fuel cleaners will list the exact performance metrics one should expect, but this one does.
This product uses a 3-in-1 fuel additive to help keep your engine humming at its best while improving other performance metrics.
The fuel system cleaner called Max-Clean can give you back your original fuel economy after it has thoroughly cleaned your combustion chambers, intake valves, and injectors.
It can also be used on carburetor engines to get some fuel savings. In fact, the Royal Purple Max-Clean boldly proclaims what it can do for your ride.
This product claims to help you get at least the following savings; 3.2% less fuel usage, increase your surge horsepower by at least 2.6%, it will curb your emissions by at least 12%, while also reducing output of carbon monoxide by 18% and mono-nitrogen oxides by 13%.
Many satisfied customers gave this fuel system cleaner high mark through online reviews, and you can read some of them.
Here is a good video for Closer view of the cleaner in action
3 – Mityvac MV5565 Fuel Injector Cleaning Kit
This is a complete kit and it uses compressed air to help eliminate dirt and debris from the interiors of fuel injectors.
While other injector cleaners are mainly additives for your fuel tank, the Mityvac MV5565 is designed to be applied directly onto the intake and injector valves.
This is one of the best fuel injector cleaners, and it has the power to dissolve and degrade all the carbon and dirt that has accumulated right at the nozzles of the fuel injectors.
This toolkit is popular with professional mechanics and auto repair services with access to ready pressurized air.
The kit is designed to use air to apply the powerful solution directly to the parts that need cleaning.
You can use this product in both high and low-pressure fuel chambers and that applies to almost all types of vehicles.
You don’t have to worry about the sediments getting combined once the fuel cleaner is applied.
The end result of using the Mityvac MV5565 Fuel Injector Cleaning Kit are, cleaner emissions, better fuel economy and your engine will start and run much better.
With this product, you get a regulator and gauge to be used in monitoring the level of pressure, as the cleaning fluid is applied to the appropriate car engine parts.
To get the best out of this tool, you’ll need to purchase an adapter kit. Because of the cost, you’ll find this better fuel injector cleaner at your local mechanic shop.